RF communication based wireless remote control of devices in-home offices using AVR microcontroller

RF communication based wireless remote control of devices in-home offices using AVR microcontroller

Now: ₹9999
Was: ₹ 9999/-

List of the Following Materials. You will Download Software/ Report

  • Source code/Report

RF (radio frequency) communication-based wireless remote control is a popular method for controlling devices in home offices. An AVR microcontroller can be used as the brain of the system to send and receive RF signals.

Here's a basic outline of how such a system could work:

Choose an RF module: Start by selecting an RF module that operates at a frequency that is legal in your country, and that can communicate reliably over the distance required. Examples include the 433MHz or 315MHz RF modules.

Choose an AVR microcontroller: Next, choose an AVR microcontroller that has a built-in RF transmitter and/or receiver. The popular AVR microcontrollers used in such projects are ATmega8, ATmega16, and ATmega32. You can use an Arduino board, which has an AVR microcontroller and plenty of resources to make your job easier.

Write the code: Write the code to program the AVR microcontroller to receive signals from the remote control and respond accordingly by sending the appropriate signals to the device being controlled.

Build the circuit: Build the circuit by connecting the RF module, AVR microcontroller, and other necessary components such as voltage regulators, capacitors, and resistors.

Test the system: Test the system by sending commands from the remote control to the AVR microcontroller and making sure that the device being controlled responds appropriately.

Integrate the system: Finally, integrate the system with the device being controlled, such as a light switch or a motor, so that the remote control can operate it wirelessly.

  1. Customer are advice to watch the project video file output, before the payment to test the requirement, correction will be applicable
  2. After payment, if any correction in the Project is accepted, but requirement changes is applicable with updated charges based upon the requirement.
  3. After payment the student having doubts, correction, software error, hardware errors, coding doubts are accepted.
  4. On first time explanations we can provide completely with video file support, other 2 we can provide doubt clarifications only.
  5. If any Issue on Software license / System Error we can support and rectify that within end of the day.
  6. Extra Charges For duplicate bill copy. Bill must be paid in full, No part payment will be accepted.
  7. Online support will not be given more than 3 times.